Solution to a Failure in Network Adapter Detection in Windows 10
Upgrade Windows 10 from Windows 7 or Windows 8/8.1 you may find that the Device Manager can see the network interface card (NIC) installed and will report that it is working legitimately yet in Control Panel the Networking and Sharing Center won’t see the network adapter by any stretch of the imagination. Clearly, you won’t have the capacity to interface with the Internet or another PC on the network. Moreover, the remote services won’t work either. In spite of the fact that the remote adapter will appear to work, Windows 10 won’t have the capacity to locate any remote networks.
This is a fairly odd conduct because Windows can discover the NIC, install the driver and verify that it is working appropriately yet the NIC is not simply impaired, it doesn’t exist at all in the Networking and Sharing Center. You can remove the NIC in Device Manager and reinstall it, reboot the PC or attempt each other deceive you can envision however Windows 10 won’t see your NIC.
While there may be different reasons for this unusual conduct however in light of what different gatherings are reporting, it is by all accounts quite often because of Cisco VPN client programming.
In a perfect world what you have to do is remove the Cisco VPN client totally from the PC that will be upgraded to Windows 10 and after that upgrade to Windows 10. Nonetheless, if you have as of now upgraded to Windows 10 and are stuck, you can get Windows 10 upgraded with no damage to your system or data. SoftwareDepot advises that this is what you have to do.
- Expect that you upgraded Windows 10 from Windows 8.1. In the newly upgraded Windows 10, go to the Search box beside Windows begin catch and type Windows 8.1.
- The primary result you will see will be Go back to Windows 8.1.
- Select the option and experience the steps to return to Windows 8.1. Microsoft has benefited work of making the procedure to return to the past version exceptionally straightforward and solid and speedy.
- After you are back in Windows 8.1 you will see the option in Control Panel – > Windows Update to upgrade to Windows 10. Before you upgrade you have to remove Cisco VPN client programming from your PC. You don’t have to reboot the PC in the wake of expelling the product.
When Cisco VPN client has been effectively removed, run the upgrade procedure again on your Windows 8.1. Once the PC is updated to Windows 10 your network card ought to work fine.